Oxidized bitumen 105/35

Description of blown bitumen 105/35

Blown bitumen 105/35is the good grade of oxidized asphalt to use as bonding compounds as hot melt adhesive at an application rate of approximately 1 Kg/m3 to bond the preformed sheets together and to structure which is made by Oxidized bitumen 60/70 by hot air. Blown bitumen 105/35 is a semi-solid oxidized grade of pure petroleum bitumen manufactured by air-blowing through an asphalt flux. Special physical properties of its grade can be used in different applications in the construction business.
BITUMENSHOP  company guaranty the quality of BITUMENSHOP blown bitumen
105/35 with the arrangement of the international inspector to check quality and quantity of the bitumen 105/35 during the loading to the vessel and controlling the production by QC by batch test report before shipping. BITUMENSHOP Company guarantees the quality to meet with ASTM.

Uses of blown bitumen 105/35

Blown bitumen 105/35 uses in the chemical, fuel, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,paint, crack seal and repairmen, civil works, roofing, construction business ; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, insulating and impregnating agent, make rubber and plastic products. The bitumen 105/35 products are for paving. also used in asphalt-based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, the base for synthetic turf; typical uses for bitumen 105/35 used also for water-proof application and corrosion resistance for pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing. Blown bitumen105/35 is using insulation and isolation bitumen membrane sheet. Car undercoating Automobile industry is specially required for blown bitumen. Vehicle undercoating material is based on Bitumen. Bitumen provides excellent waterproof, dust proof and noise proof for automobile undercoating.

Application of blown bitumen 105/35

The blown bitumen 105/35 should be heated double temperature against the softening point to be able to have flow and viscosity. To use blown bitumen 105/35, surfaces must be dry, clean and free of loose particles, formwork, curing products, irregularities, slurry, etc.

Storage/handling of blown bitumen 105/35

bitumen 105/35 has 10 years validity with multi-time heating and cooling, please refer to MSDS.

Packing of blown bitumen 105/35

Different packing is available for customer’s purpose and conveniences. BITUMENSHOP CO is the manufacturer of bitumen 105/35 in different packing including Kraft bag, meltable plastic bag, drum, and bulk. Blown asphalt 105/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. BITUMENSHOP bitumen 105/35 can be supplied in any grade and are designated by two numbers to show the softening point and penetration ranges. The bitumen grade 105/35 means the softening point is 105 and penetration is 35 desi millimeters is produced in compliance and conformity with ASTM standard and meets the following specification.

Specification of blown bitumen 105/35

 

Bitumen 105/35

Test method

Unit

Specification

Specific gravity @25/25 C

ASTM D70

(Kg/m3)

1.05 approx.

Penetration @ 25°c

ASTM  D5

mm/10

30/40

Softening point °c

ASTM  D36

°C

100/110

Loss on heating(wt) %

ASTM  D6

Wt. %

0.2 max

Flashpoint c

ASTM D92

°C

250 min

Solubility is CS2(wt) %

ASTM  D4

Wt. %

99.5 max

Specific gravity @25/25 C

ASTM D70

(Kg/m3)

1.05 approx

 

Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedIn